logo
Ürünler
Ürün ayrıntıları
Ev > Ürünler >
Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available

Adedi: 500 Ton
fiyat: pazarlık edilebilir
Standart ambalaj: Deniz kadile ambalajı
Teslim süresi: 30 gün
Ödeme yöntemi: L/C, T/T, Western Union, MoneyGram
Tedarik kapasitesi: Ayda 500 ton
Ayrıntılı Bilgiler
Menşe yeri
ÇİN
Marka adı
HD BOILER
Sertifika
ISO9001 , SGS , TUV , ASME , EN
Model numarası
ekonomizer
Renk:
özelleştirilmiş
HS kodu:
3215960855
Tip:
Enerji tasarrufu
Yüzey tedavisi:
Boyalı
Basınç:
Düşük / Yüksek Basınç
Yapı:
Yangın / Su Tüpü
Ürün Tanımı

 

 

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available

 


 

 

Product Description

 

Economizer coils are installed downstream of the boiler bank—their main job is to preheat the feed water by soaking up heat from the hot exhaust gases. When it comes to economizers, they’re always of the water tube type.
The tubes used in economizers vary based on the specific application. For example, bare tubes are super common in industrial boilers. Then, for setups like heat recovery boilers in sulfuric acid plants, gilled tubes are the go-to choice. Finned tubes, on the other hand, are really popular for HRSG (Heat Recovery Steam Generator) applications.
Typically, the feed water can be heated to a temperature that’s roughly 20 to 30 degrees Celsius below the boiler’s saturation temperature.

 

Specifications

 

Description Economizer
Material Alloy steel, Carbon steel, SA210C ,SA213T22, etc.
Material standard ASTM, EN or ISO etc.
Dimension Customization
Weight

Min: 10 ton

Max.:1000 ton

Smelting Process: EF+LF + VD
Process Material→Ingot → Hot/Cold-Rolling→ Heat treatment (Normalizing+ tempering) → Inspection →rough machining→UT →2nd Heat treatment →finishing machining →Inspection
UT standard ASTM A388 or EN10228, etc

 

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available 0

 

Application

 

In most commercial and industrial boiler setups, when the boiler’s running, about 10 to 20% of the fuel’s heating value gets released into the air along with the stack gases. That’s where stack economizers come in—they’re built to get back a good chunk of that energy that would otherwise be lost with the stack gases. This helps boost the boiler system’s efficiency by a lot.
When you’re picking out an economizer, there are a few key things you need to keep in mind:

• Gas-side Pressure Drop. Added back-pressure on the boiler stack affects the combustion air fan throughput capability. The economizer and combustion air fan(s) must be sized properly in order to assure a suitable system operation and capacity.

• Feedwater Temperature. The feedwater to the economizer must be deaerated and the temperature setpoint minimally at 220oF to prevent tube corrosion.

• Water-side Pressure Drop. Feedwater pumps must be sized to accommodate the economizer pressure drop. Additionally, a continuous modulating feedwater system is required to ensure proper flow rates through the economizer.

 

Economizer Workshop

 

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available 1

 

Certificate

 

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available 2

 

Company Introduction

 

Established in 1985,Zhangjiagang Hua Dong Boiler Co.,Ltd.(trading as HD Boiler),produces power plant; industrial; waste heat; waste incineration; biomass; organic heat carrier and electric steam boilers. Coupled with a comprehensive range of heating surfaces, HD Boiler brings to the market a unique service including boiler design , fabrication, installation, maintenance and replacement of boiler pressure parts.

 

Ürünler
Ürün ayrıntıları
Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available
Adedi: 500 Ton
fiyat: pazarlık edilebilir
Standart ambalaj: Deniz kadile ambalajı
Teslim süresi: 30 gün
Ödeme yöntemi: L/C, T/T, Western Union, MoneyGram
Tedarik kapasitesi: Ayda 500 ton
Ayrıntılı Bilgiler
Menşe yeri
ÇİN
Marka adı
HD BOILER
Sertifika
ISO9001 , SGS , TUV , ASME , EN
Model numarası
ekonomizer
Renk:
özelleştirilmiş
HS kodu:
3215960855
Tip:
Enerji tasarrufu
Yüzey tedavisi:
Boyalı
Basınç:
Düşük / Yüksek Basınç
Yapı:
Yangın / Su Tüpü
Min sipariş miktarı:
500 Ton
Fiyat:
pazarlık edilebilir
Ambalaj bilgileri:
Deniz kadile ambalajı
Teslim süresi:
30 gün
Ödeme koşulları:
L/C, T/T, Western Union, MoneyGram
Yetenek temini:
Ayda 500 ton
Ürün Tanımı

 

 

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available

 


 

 

Product Description

 

Economizer coils are installed downstream of the boiler bank—their main job is to preheat the feed water by soaking up heat from the hot exhaust gases. When it comes to economizers, they’re always of the water tube type.
The tubes used in economizers vary based on the specific application. For example, bare tubes are super common in industrial boilers. Then, for setups like heat recovery boilers in sulfuric acid plants, gilled tubes are the go-to choice. Finned tubes, on the other hand, are really popular for HRSG (Heat Recovery Steam Generator) applications.
Typically, the feed water can be heated to a temperature that’s roughly 20 to 30 degrees Celsius below the boiler’s saturation temperature.

 

Specifications

 

Description Economizer
Material Alloy steel, Carbon steel, SA210C ,SA213T22, etc.
Material standard ASTM, EN or ISO etc.
Dimension Customization
Weight

Min: 10 ton

Max.:1000 ton

Smelting Process: EF+LF + VD
Process Material→Ingot → Hot/Cold-Rolling→ Heat treatment (Normalizing+ tempering) → Inspection →rough machining→UT →2nd Heat treatment →finishing machining →Inspection
UT standard ASTM A388 or EN10228, etc

 

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available 0

 

Application

 

In most commercial and industrial boiler setups, when the boiler’s running, about 10 to 20% of the fuel’s heating value gets released into the air along with the stack gases. That’s where stack economizers come in—they’re built to get back a good chunk of that energy that would otherwise be lost with the stack gases. This helps boost the boiler system’s efficiency by a lot.
When you’re picking out an economizer, there are a few key things you need to keep in mind:

• Gas-side Pressure Drop. Added back-pressure on the boiler stack affects the combustion air fan throughput capability. The economizer and combustion air fan(s) must be sized properly in order to assure a suitable system operation and capacity.

• Feedwater Temperature. The feedwater to the economizer must be deaerated and the temperature setpoint minimally at 220oF to prevent tube corrosion.

• Water-side Pressure Drop. Feedwater pumps must be sized to accommodate the economizer pressure drop. Additionally, a continuous modulating feedwater system is required to ensure proper flow rates through the economizer.

 

Economizer Workshop

 

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available 1

 

Certificate

 

Boiler Economizer Energy-Saving Solution Industrial Boilers Customizable Design Available 2

 

Company Introduction

 

Established in 1985,Zhangjiagang Hua Dong Boiler Co.,Ltd.(trading as HD Boiler),produces power plant; industrial; waste heat; waste incineration; biomass; organic heat carrier and electric steam boilers. Coupled with a comprehensive range of heating surfaces, HD Boiler brings to the market a unique service including boiler design , fabrication, installation, maintenance and replacement of boiler pressure parts.

 

Site Haritası |  Gizlilik Politikası | Çin iyi. Kalite Kızdırıcı Bobin Tedarikçi. Telif hakkı © 2017-2025 Zhangjiagang HuaDong Boiler Co., Ltd. Hepsi. Haklar korunmuş.